|
|
|||||||
| 6.0L PSD FICM Reprogramming Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years. If you have questions or would like more information about the benefits, please post here. |
|
|
Thread Tools | Display Modes |
|
#2
Mon, September 10th, 2012, 01:33 PM
|
||||
|
||||
So these are my recommendations. A40 for the FICM is the best all around program. A80 is fine, but you want to add a PCM tune as well. EGT temps are easily manageable. As far as a rollback, I would rollback, add EGR delete to the programming and probably the 65 tune. This should give you a safe setup until you get studs if you ever do. This should get you started.
I hope this helps
__________________
19 F-350 6.7 Auto 16 F-350 6.7 Auto 05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM) 00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3 95 F-Superduty 7.3 DI, Auto, Mechanics Truck 94 F-Superduty 7.3 DI, 5 speed, Flatbed 
|
|
|
Threaded Mode