Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > The Starting Point > New Member Introductions

New Member Introductions
Welcome to the Power Hungry Performance Forum. We're glad that you're here! Start a new thread and tell us a little about yourself!

PLEASE POST TECHNICAL and/or SUPPORT QUESTIONS in the APPROPRIATE SECTION of the FORUM

Reply
 
Thread Tools Display Modes
  #1  
Old Tue, July 26th, 2022, 03:14 PM
Hoosier Windmills Hoosier Windmills is offline
Windmiller
 
Join Date: Jul 2022
Location: Chuurubusco, IN
Posts: 3
Hoosier Windmills is on a distinguished road
Default

Thanks Bill. I reflashed the truck last night and set the power level on 4 like you recommended since I don't have a pyro installed yet. WOW, what a difference! My engine was stock at 190HP and this jump to 230HP made a world of difference! I can actually accelerate in 2 speed axle high at highway speeds! The truck would barely accelerate in any gear in 2 speed high, but now I can take off in low and leave the axle in high. The difference in torque on the low end and taking off is an AMAZING improvement! I'm looking forward to tracking mileage now to see if there are any improvements, although, due to the increased driveability, I wouldn't care if it stayed the same! Thanks again for a great product and support! I will definitely stay in touch as I continue to upgrade the truck.
Reply With Quote
  #2  
Old Wed, July 27th, 2022, 08:05 AM
Power Hungry's Avatar
Power Hungry Power Hungry is offline
The Godfather of Power Stroke Tuning
 
Join Date: Nov 2008
Location: Winder, GA
Posts: 2,271
Power Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud of
Default

Quote:
Originally Posted by Hoosier Windmills View Post
Thanks Bill. I reflashed the truck last night and set the power level on 4 like you recommended since I don't have a pyro installed yet. WOW, what a difference! My engine was stock at 190HP and this jump to 230HP made a world of difference! I can actually accelerate in 2 speed axle high at highway speeds! The truck would barely accelerate in any gear in 2 speed high, but now I can take off in low and leave the axle in high. The difference in torque on the low end and taking off is an AMAZING improvement! I'm looking forward to tracking mileage now to see if there are any improvements, although, due to the increased driveability, I wouldn't care if it stayed the same! Thanks again for a great product and support! I will definitely stay in touch as I continue to upgrade the truck.
Glad to hear you're enjoying the upgrade.

In most cases, customers have notices an increase in fuel economy. At worst, it stayed the same but the truck drove significantly better. Once you settle in to the new tune, you should be able to see some mileage improvement. It usually takes a couple weeks to observe as people usually play with the tuning a little bit and it takes some time for the "shiny" to wear off.

Keep us posted how it goes.
__________________
Bill Cohron - The Mad Doctor

Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997!
(678) 890-1110

www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!

Bring back Windows™ XP and 7.
Windows™ Vista and Windows™ 8 is a pain in my a$$!
Windows™ 10 is only slightly less annoying!
Windows™ 11 is garbage!

Much to my surprise, I'm actually quite enjoying Linux!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 03:25 AM.


All Contents Copyright 2008-2024, Power Hungry Performance