Calibration error F1

tohi2care · #1 Fri, May 8th, 2009, 08:31 PM

The hex code has changed

So, how much is this going to cost me?

***Jackpine*** · #2 Fri, May 8th, 2009, 09:34 PM

Quote:

Originally Posted by tohi2care

The hex code has changed

So, how much is this going to cost me?

I don't think it will be anything, because that's the way PHP operates. But if there IS a charge, it will be minimal. The biggest problem will be the wait you'll have for Bill to get to you to rebuild your tunes. He can't do it when he's out of "touch".

And, realize, of course, that any time he devotes to your problem, takes him away from completing other people's tunes (if you really want to feel guilty). :o Hope you know I'm just pulling your chain here. The reflash was not really your fault. Would have been worse if you had NOT returned your truck to stock first.

Still, you can use the Gryphon as a PID monitor on Level 0 if it won't program to a higher level until Bill rebuilds your tunes, so all is not lost.

- Jack

tohi2care · #3 Fri, May 8th, 2009, 09:41 PM

Cool

tohi2care · #4 Mon, June 29th, 2009, 09:29 PM

Any progress on the rebuild?

***Jackpine*** · #5 Mon, June 29th, 2009, 10:02 PM

Quote:

Originally Posted by tohi2care

Any progress on the rebuild?

You've been incredibly patient! I thought your reflash problem had been taken care of long ago. With Lars putting this on the Moderator's forum, you should get fairly quick response - if not, tell us!

- Jack

tohi2care · #6 Fri, July 3rd, 2009, 04:51 PM

I know they are busy and with the health issues I didn't want to pester them. But being it is now boating season I could use the towing tune I had.

tohi2care · #7 Sat, July 4th, 2009, 03:12 PM

Quote:

Originally Posted by jac443221

So I got the email the other day that my custom tunes were ready. I updated pegasus, programmed truck back to zero, Then followed the steps to download tunes.

This is the error msg I received on the screen word-for-word:

"Unable to locate a valid Target Instruction file.

This often occurs during server maintenance or when files on the server are being updated.

This is may also be caused by a firewall issue or other internet related problem.

Please contact Power Hungry for further assistance."

Then, I clicked "OK" and it gave me this text in the Pegasus screen:

"Unable to locate a Target Instruction file. Process failed

Update failed. Please contact your vendor for assistance."

I then disabled my firewall and tried again and same thing. I read another thread where someone had the same issue and Bill mentioned the tunes not uploading on the server. Any help would be appreciated

I am currently experiencing the same problem. It actually happened the first time I got my tune too and my Gryphon was tagged with the wrong serial number. Oh well.

http://dygytalworld.ehost-services13...read.php?t=221