|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
#2
Sat, May 23rd, 2009, 07:56 PM
|
||||
|
||||
I can tell you that the stock tune is the stock tune and the performance tune is the performance tune. What happened when you disconnected the battery is that all the learned data was wiped out. The PCM needs to go through a relearn procedure in order to get all the base fuel trims and stuff back to normal.
Best suggestion is to drive a day or two with the programmer set back to stock. This will give the PCM a chance to level out. Then program your truck back to your performance tune. This should get you back to where you were. Take care.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
|
Threaded Mode