![]() |
|
Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I bought a locked Gryphon programmer for my 5.4 a couple weeks ago
![]() Thanks |
#2
|
||||
|
||||
![]() Quote:
Could you possibly get the guy you bought it from to return the tune on his truck to stock? This is what should have happened! Or, is it possible the unit simply does not understand your truck's hex code when you attempt to program YOUR PCM? If that's the case, it possibly still has custom tunes installed, which won't work on your truck. Those can be replaced with a calibration update through Pegasus. - Jack
__________________
2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
#3
|
|||
|
|||
![]()
I sent bill a message but i guess hes loaded down with sema... I would send it back to the seller, but he is a crook. He told me it was unlocked, once I got it and figured out it was locked, he hasnt answered my calls, emails or paypal claims... Oh well
|
#4
|
||||
|
||||
![]() Quote:
Let me know the answers to this. I'll try to check back before I leave town tomorrow morning. - Jack |
#5
|
|||
|
|||
![]() Quote:
The gryphon acts just like normal, shows the 4 gauge display but shows level 3 in the corner. The first time i plugged it in it read my HEX code and everything like my edge did. But when I try to program the truck, the gryphon says that it is currently downloaded onto a different truck. So before the seller set it, he never unprogrammed his truck which was on 3... |
#6
|
||||
|
||||
![]()
Have you gone into pegasus and tried the utility options? One of them is 'Restore Gryphon' and if I remember correctly it should reset the gryphon to 'out of the box' status.
![]()
__________________
|
#7
|
|||
|
|||
![]()
Ya i tried that too and it asks for a unlock key password.
![]() |
#8
|
||||
|
||||
![]()
yup, I had that problem first day I got mine because something didn't go right.
I guess you have to wait until Bill gets back if none of the options work, but until he does maybe also try the gryphon update or target functions. ![]()
__________________
|
#9
|
||||
|
||||
![]()
Its not your fault that you bought a locked gryphon.
Sounds like someone sold it in a hurry w/o thinking or its a gryphon with legs(stolen). So to any other posters WE WILL have to let this one go through PHP protocol! Bill and Corey will have to figure out whose it was. Please if anything give them a shout by using this forum's private messaging system. Their user names are Power Hungry and Groovy Chick. IMO Lars
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
#10
|
|||
|
|||
![]() Quote:
![]() |
|
|