|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Sun, January 3rd, 2010, 06:58 PM
|
|||
|
|||
question re: display of COM GEAR
well my gryphon works awesome. I love the improved shifting!! I have not encountered any operational bugs at all.. so far so good. Also too soon to determine if gas milage improves.
I was setting up my display to show ECT, EOT, LOAD and COM GEAR. Well com gear does not show up in that menu at all, i scrolled up n down several times. Is it unavailable ? |
|
#2
Sun, January 3rd, 2010, 07:45 PM
|
||||
|
||||
|
No its there, I think it's on the bottom of the list...or at least somewhere down there. That is one of my four.
__________________
|
|
#3
Sun, January 3rd, 2010, 08:16 PM
|
|||
|
|||
|
One of my four as well.
|
|
#4
Sun, January 3rd, 2010, 10:53 PM
|
|||
|
|||
|
arg, i just scrolled thru (twice) and counted the displays listed ... i have
21 display options, the gryphon manual shows there 22  weird.
|
|
#5
Sun, January 3rd, 2010, 11:03 PM
|
||||
|
||||
|
Hmmm, that is strange. Try finding it in another place. When you are at the main menu go to diagnostics>data stream options then see if you can find the COM GEAR by selecting a PID. If its not there then you should probably talk to Bill.
__________________
|
|
#6
Mon, January 4th, 2010, 11:27 AM
|
||||
|
||||
|
The firmware hasn't changed in forever and all the PIDs should be in there. Here's the list...
Engine RPM Vehicle Speed Engine Coolant Temp Engine Oil Temp Trans Fluid Temp Cyl Head Temp Intake Air Temp Line Press Desired Actual Fuel Rail Pres Output Shaft Speed Turbine Shaft Speed Mass Air Flow Mass Air Flow Volt Variable Cam Spark Adv Torque Control Engine Load APP Sensor BatteryVolt Inst MPG Avg MPG Commanded Gear Check and make sure that your firmware is version 3.02.0639. If it's not, you'll need to update the firmware. Let me know.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying! Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
#7
Mon, January 4th, 2010, 02:21 PM
|
|||
|
|||
|
ahh, its 2.50.3657
i'll try the firmaware update |
|
#8
Mon, January 4th, 2010, 03:31 PM
|
|||
|
|||
|
is this link the firmware update instructions ? i ask because it just says "update your gryphon" not "update your firmware" . Want to be sure.
http://forum.gopowerhungry.com/1034-post1.html |
|
#9
Mon, January 4th, 2010, 03:40 PM
|
||||
|
||||
|
That looks like the right one.
Follow the instructions.
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
|
#10
Sat, January 9th, 2010, 06:24 PM
|
|||
|
|||
|
i didnt update it yet
|
|
|
Linear Mode
