![]() |
|
Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Bill helped me with a tune for the tranny. I'm not sure what he did but when I'm cruising at 1100-1200 RPM's the truck feels like it's missing. Someone suggested the torque converter was doing something wrong but I have no clue. It feels like it needs to downshift for a firmer feel because it feels weak at those RPM's.
The truck had a 4.6-5.4 engine swap and Bill wrote the tunes to make it a 5.4 and he tweaked a few other things at the same time. Can one of you moderators forward this to Bill and see if this issue is related to the tweaks he made? Also, the RPM's really ramp up (about 5000) before down shifting when I go to pass on the highway if I "stomp" on it, but if I "ease" into it everything is fine. The RPM's also ramp up when I slow for a corner or dip in the road and then get back in the gas. This happens all the time, not just when I "stomp" on it. Thank you Last edited by RobbyMartin; Sat, July 31st, 2010 at 11:45 AM. |
#2
|
||||
|
||||
![]()
Try calling PHP next week.
I'll post a note for them.
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
#3
|
||||
|
||||
![]()
I took a message for Bill.
__________________
Tuning, PCM flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
|