|
|
|||||||
| 6.0L PSD FICM Reprogramming Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years. If you have questions or would like more information about the benefits, please post here. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Mon, February 21st, 2011, 04:20 PM
|
|||
|
|||
2004 ECM strategy
I'm definitely going to get the FICM on my truck programmed by PHP, but what I don't know is if it's worth it to get the ECM done at the same time. All the info I've been able to find concerns the 05+ trucks with the VXCFxx strategies. My truck is currently running the VXBC9N8. Would I benefit from a rollback? I have an extra FICM that I could send in, but not an extra ECM, so if I do a rollback I'll have to wait for a remote programmer...
Thanks! Build date 2/2004, 4x4, auto, LWB, CC. Only mod is 4" exhaust. 
|
|
#2
Mon, February 28th, 2011, 03:46 PM
|
|||
|
|||
|
2004 ficm
i had mine done by bill, both the ficm and the roll back truck now has the power it did new.
your ficm strat is the latest and is junk please read Go Back Power Hungry Performance Forum > Ford Super Duty & Excursion > 2003 to 2007 6.0L Power Stroke Diesel my story and my questions hope this helps
|
|
#3
Tue, March 1st, 2011, 11:55 PM
|
|||
|
|||
|
Sure enough, your thread is almost the only one out there with any info for people with VXBCxxx strategies. Sounds like I'll be ordering the remote programming soon. When I first got the truck, in the spring of 2009, the word on all the forums was to make sure you had the latest flash, boy what a mistake!
Looking forward to the power I used to have! Thanks
|
|
#4
Sun, March 6th, 2011, 09:47 AM
|
|||
|
|||
|
gryphon
trust me just order a new gryphon then you own it and pay bill 4 the programming it would be the quickest
an 04 original rollback ??? this will depend on your build date and the sticker number on your pcm ficm = AMZ2AL09.PHF trans = TQBD1N6.PHF <--- includes the original tow haul that came factory> pcm = VXBC1NZ.PHF <--- includes pilot injection as came with factory> all these files can be downloaded at http://www.motorcraftservice.com/vdi...?swproduct=IDS but bill has them on his server and runs your computer with remote desktop and programs the gryphon in different modes to program your trucks different modules please read Go Back Power Hungry Performance Forum > Ford Super Duty & Excursion > 2003 to 2007 6.0L Power Stroke Diesel my story and my questions (for people that need more info) Last edited by ssredrino; Sun, March 6th, 2011 at 10:10 AM. Reason: added info
|
|
|
|
Linear Mode
