|
|
|||||||
| 2004 to 2008 F-150 and Mark-LT 4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs. |
|
|
Thread Tools | Display Modes |
|
#7
Sun, April 26th, 2009, 12:15 AM
|
||||
|
||||
When adjusting the brightness on the LCD display, the process that handles reading the PCM is momentarily interrupted causing some or all of the displays to read 0 (zero). This is normal, but should resume monitoring functions after the buttons are done being pressed. If not, either a key off/key on or unplugging and reconnecting should fix the problem.
Take care.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
|
Threaded Mode