Unit Issue or Just a Bad Day????

[Power Hungry]

When adjusting the brightness on the LCD display, the process that handles reading the PCM is momentarily interrupted causing some or all of the displays to read 0 (zero). This is normal, but should resume monitoring functions after the buttons are done being pressed. If not, either a key off/key on or unplugging and reconnecting should fix the problem.

Take care.

[Jackpine]

Originally Posted by Power Hungry

When adjusting the brightness on the LCD display, the process that handles reading the PCM is momentarily interrupted causing some or all of the displays to read 0 (zero). This is normal, but should resume monitoring functions after the buttons are done being pressed. If not, either a key off/key on or unplugging and reconnecting should fix the problem.

Take care.

Thanks, Bill - another one for my troubleshooting file.

Hope your trip is going smoothly!

- Jack

[svt2205]

So many things to learn with these little devices. And I have yet to try anything other then select the level 2 program.

Gents, thanks for the feedback. I hopefully I wont have too many other foolish questions.

Thanks