![]() |
|
Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]()
Sounds like the TC is unlocking and locking? Could you change the display to monitor "Comm Gear" and verify this? The TC is locked when you see a padlock symbol.
- Jack
__________________
2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
#2
|
|||
|
|||
![]()
Tried that. I t is not the tq and it also does not show it jumping in and out of gears.
|
#3
|
||||
|
||||
![]() Quote:
And, if not, I wonder what would happen if you retarded the spark by 0.25 degrees in the tune you're using? I'm not saying this is the BEST fix, but any additional information might help Bill adjust things. - Jack |
#4
|
|||
|
|||
![]()
Mine is in second gear and when I go through a school zone.The hunting stops the second I let off on the throtle, then goes away for a day. It only happens in second going about 30k. Bill where are you???? I sent him a PM a few days ago... He is just so busy...
![]() ![]() |
Thread Tools | |
Display Modes | |
|
|