Edge 15050

MrSub · #1 Sun, June 7th, 2009, 03:35 PM

I have not talked to Edge yet because they are closed. I was in the middle of updating the unit via the USB cable over the net. That is where I got the error. When I plug it into my truck it just lights up. Nothing comes up on the screen and when I try to update it again via USB it says it is in Run mode or corrupted memory.

***Jackpine*** · #2 Sun, June 7th, 2009, 09:10 PM

Quote:

Originally Posted by MrSub

I have not talked to Edge yet because they are closed. I was in the middle of updating the unit via the USB cable over the net. That is where I got the error. When I plug it into my truck it just lights up. Nothing comes up on the screen and when I try to update it again via USB it says it is in Run mode or corrupted memory.

OK, all is not lost. DO talk to them. I'm sure they can talk you through a repair that will have you up and running again.

One note: Bill recommends that unless you are having problems with the unit, that you do not try to update the firmware in the Edge. In other words, if it ain't broke, don't fix it!

- Jack

MrSub · #3 Sun, June 7th, 2009, 09:11 PM

Do you give new cables for the truck when you upgrade them or use the ones that come with

***Jackpine*** · #4 Sun, June 7th, 2009, 09:14 PM

Quote:

Originally Posted by MrSub

Is it the cable for the usb update or the cable for the truck that is junk.

Looks like we were posting at almost the same time. It's the OBDII cable that's the problem, but, even if yours seems ok now, there's no guarantee it will continue to function properly. And, PHP does not want to take "ownership" of the warranty on faulty cables. (They also don't want to sell faulty equipment).

- Jack

MrSub · #5 Mon, June 8th, 2009, 04:42 PM

Called Edge today and they fixed it online for me. Won't do that again. THanks for all the help guys. Will be checking back often to see if you guys will update to the gryphons again. Thanks

***Jackpine*** · #6 Mon, June 8th, 2009, 05:02 PM

Quote:

Originally Posted by MrSub

Called Edge today and they fixed it online for me. Won't do that again. THanks for all the help guys. Will be checking back often to see if you guys will update to the gryphons again. Thanks

Good! I thought they'd be able to get you going again. Their Tech Support has really improved in the last six months or so from the posts I've been reading. I think it's good to let them exercise it to show them there IS a need, and to keep the load down on our Mad Doctor.

- Jack