Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled)

F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled)
If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here.


 
 
Thread Tools Display Modes
  #1  
Old Thu, September 17th, 2009, 09:56 PM
highrider68 highrider68 is offline
Whopper Junior
 
Join Date: Aug 2009
Location: Belton, SC
Posts: 2
highrider68 is on a distinguished road
Need Help Installing Phoenix Flash on Windows Vista 64 Bit

I installed Phoenix Flash onto my computer following the step by step instructions supplied. When I get to the next page, I see, "The supplied USB drivers are not compatible with 64 Bit versions of Windows XP or Vista." I found the Vista 64 USB Driver Installer in the customer support section of the website and installed it. I got on PF, activated my account and it and every seems to work as it should except my status is "Disconnected." I have checked all connections and rechecked the driver install and it says that the driver is installed, up-to-date, and ready to use. I then installed PF on an older 32 bit computer and when I tried to activate I got "This software has already been activated." What can I do to get this thing going? Thanks
  #2  
Old Thu, September 17th, 2009, 10:01 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

Well, I don't know. I hope that Bill gets a look at this before he goes on his hiatus for ten days.

I'll put it in the moderators' help section and maybe he'll get with you shortly.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
  #3  
Old Fri, September 18th, 2009, 02:41 PM
sam8 sam8 is offline
Double Whopper
 
Join Date: Aug 2009
Location: Rough and Ready, California.
Posts: 44
sam8 is on a distinguished road
Default

Highrider;

FWIW the software installed and operated just fine on my HP dv4000 laptop, which is about a 2005 model with XP and a celeron processor.
I do recall having to install the chip in the burner to get the system up and running.
__________________
Proud father of a U.S. Army veteran, proud uncle of an Active Duty U.S. Army Ranger.

'97 F-350 CC LB 4x4-Orignal Owner. Arrowcraft DRW Kit, Tymar int., Banks IC, Beans D-66 Turbo, Hypermax DP, 4 inch exhaust, ATS Triple Loc converter, Mag Hytec Trans Pan,Tru-cool Trans Cooler, ORU Shackle Reverse, Ultralite Gauges, PHP F.U. 2 Flex 6 pos. chip Terminator modded 17* HPOP and Scan Gauge
  #4  
Old Fri, September 18th, 2009, 08:06 PM
highrider68 highrider68 is offline
Whopper Junior
 
Join Date: Aug 2009
Location: Belton, SC
Posts: 2
highrider68 is on a distinguished road
Default

Well I am finally up and going. There was a burner install issue. Bill called me around noon today and got me up and going. When the burner was installed, the computer labeled it as comm17. The PF only recognize comm1-comm16. I renamed the burner as comm2 and bingo bango. Thanks for all of your help Bill, even on your day off. Your customer service is the best!!! And your tunes, even better!!! Talk about waking up the sleepy giant. Ya'll have a fun and safe vacation. Thanks again
  #5  
Old Fri, September 18th, 2009, 10:12 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
 
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default

NICE!!
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:20 AM.


All Contents Copyright 2008-2024, Power Hungry Performance