|
|
|||||||
| Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here. Also, check out our Facebook group: Facebook - Minotaur Tuners |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Tue, November 10th, 2009, 09:25 PM
|
||||
|
||||
Why not just soften the throttle table a little. You would have to basically push much harder to the same amount of power. Everything above half throttle could be the same, but below kill it by about 10-15 percent.
__________________
www.littlepowershop.com 1-877-227-0823 
|
|
#2
Tue, November 10th, 2009, 11:00 PM
|
||||
|
||||
|
From post number 2:
.........for the most part the only thing you can do to keep from spinning is using a stock program or less than stock power levels. Exactly my thinking, John!
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|
|
#3
Wed, November 11th, 2009, 12:03 AM
|
||||
|
||||
|
Just get yourself some of these:www.mattracks.com
Then you will be able to go anywhere! J/K!!!!! LOL's Lars 
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him.
|
|
|
|
Hybrid Mode
