Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Minotaur Automotive Tuning Software
Reload this Page More ?'s
Register FAQ Calendar

Minotaur Automotive Tuning Software
Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here.

Also, check out our Facebook group: Facebook - Minotaur Tuners

Reply
 
Thread Tools Display Modes
  #1  
Old Sun, December 6th, 2009, 05:12 PM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
  
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default
Quote:
Originally Posted by cleatus12r View Post
By the way, have you adjusted any parameters that I listed above?
No.. have not yet. I put the scanner on the other day and all I had left was 2 codes for the AIH. Finally got rid of the #8 cct code( damn cps). So those two are next on the list.

What is PW at idle for stock single shot trucks?

Had one in the shop the other day and put the scanner on it to take a peek and it showed around 1.1-1.3 and 650 ICP at idle. Mine shows way more.
Reply With Quote
  #2  
Old Sun, December 6th, 2009, 05:31 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Here's a stock TDE1 (97 truck). So we're talking stock nozzles, 90cc AA code injectors.



Keep in mind that 4 MPa is 580 PSI, 4.5 MPa is 650 PSI, and 5 MPa is 725 PSI.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
Reply With Quote
  #3  
Old Tue, December 8th, 2009, 03:01 AM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
  
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default
Think I found the parameters for the Intake Air Heater,





my first guess is to set them all to "0".


What do you think?
Reply With Quote
  #4  
Old Tue, December 8th, 2009, 08:20 AM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
I don't think your "set them all to "0". " idea will work out too well.
You have to "think" like the PCM.

Since you don't have an AIH relay anymore, the PCM sees that there is no input when it is actually commanded on (proof that the AIH relay circuit is working). You need to either set the on-time to "0" (which for now I will assume is "MAIH_ON_MAX") so the PCM doesn't turn on the AIH thus it can't run the monitor diagnostic OR you need to change the diagnostic parameter to reflect that there won't be an input voltage to the PCM when it is commanded on but I haven't seen anything in the top section of the parameters list to reflect AIH monitor input values.

Good luck.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
Last edited by cleatus12r; Tue, December 8th, 2009 at 08:35 AM.
Reply With Quote
  #5  
Old Mon, December 28th, 2009, 02:41 PM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
  
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default
One more......

Besides the LBF map, what affect does boost have on fueling?
Reply With Quote
  #6  
Old Tue, February 23rd, 2010, 11:10 PM
907DAVE's Avatar
907DAVE 907DAVE is offline
BROKE
  
Join Date: Oct 2009
Posts: 1,340
907DAVE will become famous soon enough
Default
Yet another for you..........




What the heck does the Indicated Torque map do?

More shifting stuff?




How about the Exhaust Backpressure Torque Loss map?

Same thing?
Reply With Quote
  #7  
Old Wed, February 24th, 2010, 08:28 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Quote:
Originally Posted by 907dave View Post
Yet another for you..........




What the heck does the Indicated Torque map do?

More shifting stuff?

I think that the Indicated Torque has to do with the data on the scan tool. I think it is calculated using the torque table and the torque loss maps.




How about the Exhaust Backpressure Torque Loss map? I am not completely sure, but I think that calculations are made from this map to give scan tool data and it MAY also have an effect on the torque table map to further enhance the PCM's shift pressures.

Same thing?
Quote me on NOTHING!!
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
Reply With Quote
Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:55 PM.

Contact Us - Power Hungry Performance Forum - Archive - Privacy Statement - Top

All Contents Copyright 2008-2024, Power Hungry Performance