Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled)
Reload this Page Install Question
Register FAQ Calendar

F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled)
If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here.

 
 
Thread Tools Display Modes
  #1  
Old Wed, December 16th, 2009, 08:39 PM
brc51m brc51m is offline
Whopper
  
Join Date: Dec 2009
Location: New Orleans ,LA
Posts: 10
brc51m is on a distinguished road
Default Install Question
I recently ordered my FU package for 02 f250 and was just doing some research on the install of it as I have never messed with this stuff before. I have looked and read that I am supposed to use a scotch brite pad and laquer thinner for cleaning the terminals....is that correct? I was also wondering if this chip will come with install instructions with or without pics or is there a video somewhere online that I can watch cause I dont want to over clean or damage anything in the cleaning process. Any tips/tricks that you used personally would be helpful and where you bought your cleaning stuff. Thanks
  #2  
Old Wed, December 16th, 2009, 09:24 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,653
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Personally, I use a toothpick and a brass-bristled parts cleaning brush. That is all it takes to clean the contacts.

Here are some links to installation instructions...although the chip will come with instructions.

DISREGARD THE "SHOWING COPPER" PART OF THESE INSTRUCTIONS. YOU DON'T WANT COPPER SHOWING FOR VARIOUS REASONS!!!

http://www.jegs.com/InstallationInst.../159-41615.pdf

http://www.jacksscootershop.com/imag...ss_brushes.jpg

http://forum.gopowerhungry.com/showthread.php?t=2472
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes.
SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
  #3  
Old Fri, December 18th, 2009, 10:34 AM
Power Hungry's Avatar
Power Hungry Power Hungry is offline
The Godfather of Power Stroke Tuning
  
Join Date: Nov 2008
Location: Winder, GA
Posts: 2,259
Power Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud of
Default
Instructions are included, but you can also download them here in case you want to give 'em a peek.

http://www.gopowerhungry.com/_Support.html

Take care.
__________________
Bill Cohron - The Mad Doctor

Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997!
(678) 890-1110

www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!

Bring back Windows™ XP and 7.
Windows™ Vista and Windows™ 8 is a pain in my a$$!
Windows™ 10 is only slightly less annoying!
Windows™ 11 is garbage!

Much to my surprise, I'm actually quite enjoying Linux!
 

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 11:25 PM.

Contact Us - Power Hungry Performance Forum - Archive - Privacy Statement - Top

All Contents Copyright 2008-2024, Power Hungry Performance