|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Thu, February 12th, 2009, 10:20 PM
|
||||
|
||||
Josh, I've never seen the screen you are talking about. Can you confirm for me that:
1. Your ignition was in the ON position before you connected the Gryphon to the OBDII port, and,Please, I'm just trying to eliminate some of the more common problems before we involve the "Great One". He's really up to his neck in alligators right now and we all need to cut him some slack if we can. - Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
|
#2
Thu, February 12th, 2009, 10:37 PM
|
|||
|
|||
|
no i did not try it a second time...its been a long day and my trucks been a little aggravating today...
yes the ignition was on before i plugged in the gryphon and the truck does not have a tune installed already. i just got the gryphon today and i have never had another programmer |
|
#5
Fri, February 13th, 2009, 10:56 AM
|
||||
|
||||
|
Let us know what happens and if it continues we can walk through it.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
#6
Fri, February 13th, 2009, 01:01 PM
|
|||
|
|||
|
same thing happened today
i drove the truck first running some errands so it wouldnt be cold and then tried to load the level 1 tune. it took about 35 mins today and i just gave up. if it matters, heres the steps i took. first plugged in the cable to the edge. turned ignition on. plugged in obd port. screen came on. hit menu. power programming. followed prompts to turn ignition off. then back on. screen came up saying "unlocking pcm..." and thats all that happened |
|
#7
Fri, February 13th, 2009, 02:11 PM
|
|||
|
|||
|
anytime today until about 3:30 would be great. My girlfriend is taking my truck after that and i wont have it back until sunday. If he cant reach me today, anytime after 2 on monday, wednesday, or friday would work. i understand that he is really busy right now so its no hurry if he cant reach me for a while.
|
|
|
Hybrid Mode
