|
|
|||||||
| 1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
|
|
Thread Tools | Display Modes |
|
#2
Mon, June 21st, 2010, 07:46 PM
|
||||
|
||||
The error code 0xF1 can sometimes appear during programming. Try this:
1. Leave the ignition key in the ON position. 2. Disconnect the Gryphon at the OBDII port. 3. Plug the Gryphon back into the OBDII port. 4. After getting to the main screen, wait 15 seconds for needed parameters to be loaded. If you still cannot program the PCM successfully, you'll have to contact PHP for assistance. - Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam 
|
|
|
Threaded Mode