![]() |
|
Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
![]()
its telling me it is unable to locate target instruction file...
|
#2
|
|||
|
|||
![]()
still a no go!
|
#3
|
||||
|
||||
![]()
Just to keep from having Bill ask these questions (sorry for the idiot treatment)! :o
You DID, return the tune to Level 0 before removing the programmer from the truck, right? When you plugged the programmer into your PC, Pegasus seemed to recognize it and showed the programmer's serial number on the status line, right? And, the PC was accessing the internet without any problem otherwise during all this, right? If all the above are true, then I suspect the new target files have been built with the wrong serial number or HEX identification. And this may be nothing more than some error in your User CP information? You might check that too, to insure that it is correct. If none of this applies, then I guess the only thing to do is to get on the phone to Bill to work the problem. - Jack |
#4
|
|||
|
|||
![]()
All is well.. Bill just called me and got er all fixed up. I didnt recognize the number on my call display... thought it was a telemarketer trying to sell me something.. sorry for sounding like an *** when i answered the phone.
![]() ![]() |
#5
|
||||
|
||||
![]()
No worries. I'm not terribly fond of telemarketers myself so I don't blame you .
![]() Have a great weekend! ![]()
__________________
Bill Cohron - The Mad Doctor ![]() ![]() ![]() Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Much to my surprise, I'm actually quite enjoying Linux! ![]() |
#6
|
||||
|
||||
![]() Quote:
![]() I usually tell them to ![]() .......poor Bill - thought he was calling from India ![]()
__________________
08 FX4 CREW K&N 63 series Intake Magnaflow SI/DO exhaust Custom tunes |
#7
|
|||
|
|||
![]()
Hey Bill,
I think the converter relock delay jumped to my tow tune. I drove around for a while using tune #1 and it wouldnt 'clunk' after coasting in 4th gear. But when i tried the towing tune, it did it quite frequently. Just to clarify, I would let off the throttle doing about 60-70km/h. The tranny would be unlocked, then i would get back on the throttle and it would cluck when the converter locked up again. Think you can have a look at this? thanks, Dan |
#8
|
|||
|
|||
![]()
That almost sounds like the problems I was having before Bill tweaked my tunes.
Hopefully Bill can get things worked out like he did on mine.
__________________
2005 FX4 5.4L SCREW PHP Gryphon with custom tunes 2" Front Leveling Kit / 2" Rear Add-A-Leaf Magnaflow 16616 Side Exit Exhaust Reflex Spray-in Bed Liner ACI Vanish Bed Cover LED 3rd/Tails/Front Signals 35% Front Tint Prodigy Brake Controller |
#9
|
||||
|
||||
![]()
Problem fixed. Just had to do a rebuild of the target. Don't know why it didn't take before. I must've mistyped the serial number or something.
![]()
__________________
Bill Cohron - The Mad Doctor ![]() ![]() ![]() Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Much to my surprise, I'm actually quite enjoying Linux! ![]() |
|
|