|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Fri, December 10th, 2010, 10:40 PM
|
||||
|
||||
bikerfuzz,
Did you check your latest service ticket by chance? I saw that you came up with an F1 error and I listed some steps to get you up and running.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#2
Sun, December 12th, 2010, 10:30 AM
|
||||
|
||||
|
Cody,
Let me know if you need me to assist so we can get Fuzz up and running. 
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
#3
Sun, December 12th, 2010, 04:58 PM
|
||||
|
||||
|
I haven't heard from him lately on here or in the service ticket area.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#4
Sun, December 12th, 2010, 06:42 PM
|
||||
|
||||
|
hey cody. I just posted to the message board in responce. I was out all day. so didnt get to it sooner. i TRIED it the way you told me and it didnt go.I just read you re -did the hex code.. I had a feeling after readin the forum that may b that was it. especially after our first conversation about being rushed. I will try the new upload tomorrow night when i get home from work. I hope it goes ... I will sent you an update when i am done
|
|
#6
Mon, December 13th, 2010, 03:28 AM
|
||||
|
||||
|
Thats why we're here
__________________
|
|
#7
Mon, December 13th, 2010, 12:11 PM
|
||||
|
||||
|
Nope. I will have to wait until I can get access to my work computer over the internet. Seems to me like we have a conflict of information regarding the HEX code. If I am thinking straight (which rarely happens these days), the one he gave me on the service ticket is not the one that I remember seeing on the order form.
I will get the problem fixed as soon as I have access to the PHP main database. Sorry for the delay, Bikerfuzz. I truly do apologize for the wait.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#8
Mon, December 13th, 2010, 06:27 PM
|
||||
|
||||
    :he lp: Guess you get it by now.. Tried it twice.. shows the hex code does its thing thru checksum. the clearing and writing part then... the error code again... help i;m about to give up..
|
|
|
Hybrid Mode
