p061b again

Roller · #1 Thu, February 10th, 2011, 09:05 AM

No dice. Truck still throws the same p061b error.

Maybe a new poll for how many times people have thrown their truck into limp mode...I'm somewhere in the 20's now. With the Edge it was the p061f, now it's the p061b with the Gryphon. It's always the same scenario. Getting on the throttle off the line, truck lurches forward and bang, truck throws error and goes into limp mode.

FRUSTRATED!

DarkShadowSTX · #2 Thu, February 10th, 2011, 09:20 AM

Hey, what's up man? Besides the code.

My custom tunes took care of my code issues so since you now have a custom tune, I don't really know what to tell you. Call Bill and see what he has to say. Did you do the battery reset and still get the code? FWIW my hex code is OKDG3A4.HEX I feel for you though, limp mode is

retarded. My limp mode count is probably at least 15.

Roller · #3 Thu, February 10th, 2011, 09:38 AM

Yeah I kinda figured my next step was to call the man himself. I did try the sensor reset by unplugging the battery, headlights on, etc, etc...threw the error this morning in rush hour traffic. I had a few choice words thrown my way, was told I was numero uno by a finger gesture or 2 and did a bit of

myself.
I was close on the hex code, mine's 0KDG3AB. Wonder what that last character is...
Anyway, if the mods don't have any further ideas, or with their recommendation, I figure I'll have to hit Bill up and get the lowdown before I see how far I can punt this programmer for distance...

DarkShadowSTX · #4 Thu, February 10th, 2011, 09:41 AM

How come you have a letter for the last digit while I have a number? Maybe that B is why you keep getting that code.

***88Racing*** · #5 Thu, February 10th, 2011, 10:23 AM

Quote:

Originally Posted by Roller

No dice. Truck still throws the same p061b error.

Maybe a new poll for how many times people have thrown their truck into limp mode...I'm somewhere in the 20's now. With the Edge it was the p061f, now it's the p061b with the Gryphon. It's always the same scenario. Getting on the throttle off the line, truck lurches forward and bang, truck throws error and goes into limp mode.

FRUSTRATED!

In my Sig there's a link to the PHP support system......try that to get Bill's attention....