|
|
|||||||
| 1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Tue, April 19th, 2011, 02:44 PM
|
||||
|
||||
Not to mention that Gale Banks Engineering likes to use ridiculous amounts of nitrous oxide as well........
That stuff clears up smoke nicely.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. 
|
|
#2
Tue, April 19th, 2011, 02:49 PM
|
|||
|
|||
|
Hahaha
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
|
|
#3
Thu, April 21st, 2011, 12:30 AM
|
|||
|
|||
|
lol i had the same 'problem' the other day, but honestly if you are careful you wont get much smoke n still go, on my other hand the other day i was in 100 performance and was braking to stop at a light, it turned green(i was goin about 20mph) and i just sorta stepped on it, my bad cuz i smoked out a mini van and the guy SWERVED lanes not to get smoked on, LOL!!!!!!! I was laughing out loud for a bit about that one.. oops.
__________________
2002 7.3 F250 Supercab Shortbox DIY intake CCV dumped Autometer gauges WW/ATS 1.0 exhaust housing Hutch/Harpoon in tank mods/hpX line AIH delete/ebpv delete TruCool trans cooler Straight piped PHP FU 
|
|
#4
Thu, April 21st, 2011, 12:07 PM
|
|||
|
|||
|
Yea I know, I've seen peolpe swerve to miss some smoke. Like its gonna hurt them or their car to go through it. They'ed rather my a stunt driver move to miss some smoke and take a bigger chance wrecking.
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx
|
|
#5
Sun, April 24th, 2011, 01:21 AM
|
|||
|
|||
|
I'll be smog testing my truck this week since it's due in order to renew my registration this month. My goal is over 300 rwhp on stock injectors and stock HPOP, and still pass Colorado emissions with the same tune.
Results will be posted, win or lose.
|
|
#6
Mon, April 25th, 2011, 06:44 PM
|
|||
|
|||
|
Well, good news is I passed emissions. And surprisingly, I passed with flying colors. In fact, the numbers were slightly better than last year running on a bone stock tune.
Bad news is the guys at the shop were too backed up to let me make some dyno runs. So I have set up a session with them first thing Wednesday morning before they start getting customers in the shop. Anyway, opacity numbers on the lug down test: 60 mph - 5% opacity 50 mph - 3% opacity 40 mph - 14% opacity zero shift - 1% opacity Last year the 60 mph opacity level was something like 10 or 12%, with the other numbers about the same. This is with stock injectors, stock HPOP, regulated return, intake, exhaust, and 38R turbo. Guys at the shop were pretty impressed with how clean it ran and how much power it put out when they were driving it around the shop.
|
|
#7
Mon, April 25th, 2011, 07:51 PM
|
|||
|
|||
|
Hey Curtis pardon my ignorance but what does that opacity measure? Is it unburnt hydrocarbons maybe? I'm just curious...lol I know when I lived in Colo I always thought it was getting to be a Calif East with all the BS
__________________
2000 F-250 SCLB 2wd 7.3 auto PHP stock-65t-80dd-120race-high idle-no start 4"tb exh, wicked wheel, 3 guages, AIS, coolant filt,
|
|
|
|
Hybrid Mode
