New HEX Code = New Custom Tunes?

[Jackpine]

Originally Posted by MileHigh04SCREW

Ok, so I probably do have a new HEX code. How do I check?

Do I plug my gryphon back into my truck and read the new HEX code? This won't "lock" anything since the gryphon doesn't "belong" to the old HEX code anymore, will it?

How do I ask Bill to re-write my tunes? Corey said he would do it once I updated my PCM/HEX - http://forum.gopowerhungry.com/gryph...t-1-2-a-2.html

This site has exploded in members, and I haven't been back on here since last year! Not sure how things have changed... Any help would be appreciated, as my Gryphon is currently useless!

Thanks,
MileHigh

MileHigh - You'll need to return your Gryphon to the "uncustomized" status, which will put "canned tunes" back on it. I think you have the monochrome Gryphon?

Fire up Pegasus on your PC. Make sure you have the latest version (Pegasus should offer to update itself if this is not the case), and then plug in your Gryphon. Click on [Updates]->[Gryphon Update Manager] once you are connected and apply any firmware AND calibration updates it shows. This will replace the custom tunes with canned tunes that should work just fine on your truck with the new hex code.

When you've done that, plug the Gryphon back into the truck and note the hex code (which you will get to Bill). But, feel free to use any canned tune while you wait for a new custom tune.

If I'm not being clear, ask me to clarify.

- Jack