Brightness/Contrast

***Jackpine*** · #1 Wed, July 20th, 2011, 09:20 PM

Perhaps it wasn't as "similar" as I thought.

But, Bill is the guy who can help you with this. Glad he's found the time to monitor the forum.

Edit: Longshot, you snuck in here as I was typing! Good suggestion - can't hurt!

- Jack

drek89 · #2 Thu, July 21st, 2011, 06:21 AM

It has been doing it a few times a week lately but for a while it was an every day thing. I would guess a minute+ for it to completely dim and everything still works like it should. Turning the truck off/on does return the contrast back to normal but I haven't tried unplugging/plugging it back. I also had taken the heat into consideration but it has been hotter lately than when it acted up more.

Thanks,

***Longshot270*** · #3 Thu, July 21st, 2011, 09:29 AM

Quote:

Originally Posted by drek89

It has been doing it a few times a week lately but for a while it was an every day thing. I would guess a minute+ for it to completely dim and everything still works like it should. Turning the truck off/on does return the contrast back to normal but I haven't tried unplugging/plugging it back. I also had taken the heat into consideration but it has been hotter lately than when it acted up more.

Thanks,

Then yes, I think we have been having the same thing happen. A few months ago it would do but now that it easily goes over a 100F it doesn't happen as much.

***Power Hungry*** · #4 Thu, July 21st, 2011, 10:41 AM

Unplug and reconnect (with key on) and see if the problem clears up. The only thing I can think is that the buffer got a little sidetracked. When the key is shut off, the device is still running but the display goes to sleep. If there's something in the processor that has gotten confused, then it's still there when the unit wakes up. Unplugging the device does a cold reboot and should clear out any issues.

Let me know if this resolves the problem. If not, then we'll have to track down the issue. It's possible that the thermistor which controls the contrast is acting up, but tough to say. I just can't think of anything else that would change the contrast like that.

Keep us posted.

drek89 · #5 Thu, July 21st, 2011, 03:23 PM

Well I got in it after work and it went to about 50% visibility..truck was reading outside temp? of 115..all I know is it was horribly hot inside it and every time I changed the Contrast to reset it I would go back to the main screen and it would go back to 50% visibility. I tried the unplug thing(it was almost too hot to even touch) but it did the same thing. Thinking the heat may really have something to do with it. Hoping it didn't damage it in any way.

***Longshot270*** · #6 Thu, July 21st, 2011, 09:10 PM

Quote:

Originally Posted by drek89

Well I got in it after work and it went to about 50% visibility..truck was reading outside temp? of 115..all I know is it was horribly hot inside it and every time I changed the Contrast to reset it I would go back to the main screen and it would go back to 50% visibility. I tried the unplug thing(it was almost too hot to even touch) but it did the same thing. Thinking the heat may really have something to do with it. Hoping it didn't damage it in any way.

In that case, yes it was directly heat related and the only way to fix it is to cool it off. Otherwise go with the already mentioned fix.

ranger332 · #7 Thu, September 15th, 2011, 07:45 PM

Mine went to about 50% visability yesterday when I got off of work the temp in the truck was 111F, I think. It didnt do it right away though. I must have been 10 minutes into the drive before it went dim. I readjusted the contrast in the menu and it went back to normal.