|
|
|||||||
| 2004 to 2008 F-150 and Mark-LT 4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Thu, March 5th, 2009, 05:45 PM
|
|||
|
|||
well for RPM Outlet, I can say they have the worst customer service in the world. It took me two days to get a hold of anyone, then they can't tell me where my CAI is becasue it was shipped from the warehouse. Oh well you live and learn.
|
|
#2
Wed, March 11th, 2009, 01:39 PM
|
||||
|
||||
|
Just to let you guys know. From my research that there are differences between the 96.5-04h and the 04-08. Like everyone knows they went from a 2v to a 3v head and they also changed the water pump housing. This is the big deal when looking @ or ordering ud pulleys.
Lars
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him.
|
|
#3
Wed, March 11th, 2009, 04:47 PM
|
||||
|
||||
|
They also used a 8 rib belt I believe until '03, After that it went to a 6 rib belt. If You read Troyers description it kinda explains what to look for. I know with the Troyer pulleys, You have to run a 1" shorter serp belt.
__________________
2004 FX4, K&N FIPK, Troyer underdrive pulleys, FAL270 e-fans, Gryphon programmer, Flowmaster SI/DO muffler
|
|
#4
Wed, March 11th, 2009, 05:12 PM
|
||||
|
||||
|
RZDANO
How do you like the troyer ud pulleys? Any improvements? Lars
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him.
|
|
#5
Wed, March 11th, 2009, 06:51 PM
|
||||
|
||||
|
Honestly, I am very impressed. You can feel the difference right off of idle, The motor revs quicker and throttle response feels more crisp. The only complaint I have is My headlamps are slightly dim at idle, but My idle is at about 500 rpm.(easily changed with the Gryphon) If idle is in the 600-625 range all is good. I watch my voltage on My Gryphon and it never goes under 13V even when the efans are on at idle. I have a pic of them on My first post in this thread.
__________________
2004 FX4, K&N FIPK, Troyer underdrive pulleys, FAL270 e-fans, Gryphon programmer, Flowmaster SI/DO muffler
|
|
#6
Wed, March 11th, 2009, 11:25 PM
|
||||
|
||||
|
Mine are still sitting in the box right next to the gryphon box. So maybe Friday I will get a chance to put them on.
Lars 
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him.
|
|
#7
Thu, March 12th, 2009, 03:56 AM
|
||||
|
||||
|
Lars,
We're gonna have to get you to come down here just to get all your performance stuff installed. I don't know how you do it, letting that stuff sit in the corner like that! I'd be like... 
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
#8
Thu, March 12th, 2009, 08:19 AM
|
||||
|
||||
|
Well Summit FINALLY got me my correct set of UD Pulley's, came UPS yesterday. However they sent me the wrong Serpentine belt...AGAIN.
Talked them into overnighting me the correct one at no charge, should be installing Saturday morning if all goes well and I kick this flu. Bill, I'll get you that Product # when I get back to the house. The kit from summit is $134 +tax
__________________
Specs: 2004 4.6L SCAB | Gryphon Programmer 87 Performance | Magnaflow True Dual Exhaust - Rear Cat Delete | S&B CAI | Summit Underdrive Pulleys | Troyer eFans (ordered) | Smittybilt Bullbar | Procomp 6" Driving Lights | UWS Toolbox | Rhino Lining | Chrome Steprails | 2.5" Leveling Kit | 265/70/R17 Goodyear Wrangler AT's Vids: Magnaflow Startup & Revs - Interior Exhaust Sounds
|
|
#9
Thu, March 12th, 2009, 03:07 PM
|
||||
|
||||
|
Dixie,
I called Summit and told them i have a 06 4.6 2v and they let me know they didn't have a single UD kit to install on my 2v. I looked online and the part for my truck is "sum-c2512" in the notes is has "fits 3 valve engine only" is this the same kit you got?? Or does anyone know if this WILL fit my truck?? If it does i will have them installed next week  . Let me know Price is 134.95 on the webpage
|
|
#10
Thu, March 12th, 2009, 06:16 PM
|
||||
|
||||
|
That's the kit they gave me for my 04, SUM-C2512. You'll notice they don't have anything listed for the new body style 04's just the old ones. Here's hoping!
Guess I'll know this weekend!
__________________
Specs: 2004 4.6L SCAB | Gryphon Programmer 87 Performance | Magnaflow True Dual Exhaust - Rear Cat Delete | S&B CAI | Summit Underdrive Pulleys | Troyer eFans (ordered) | Smittybilt Bullbar | Procomp 6" Driving Lights | UWS Toolbox | Rhino Lining | Chrome Steprails | 2.5" Leveling Kit | 265/70/R17 Goodyear Wrangler AT's Vids: Magnaflow Startup & Revs - Interior Exhaust Sounds
|
|
|
|
Hybrid Mode
