|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
|
|
#1
Tue, May 29th, 2012, 05:12 PM
|
|||
|
|||
Trust me, you'll want to cut the black plastic case. It WILL cause connection issues. I tried to get away without cutting a big hole and the chip didn't work cause the plastic was pushing the chip and causing no connection. I then removed everything again, cut the plastic and everything worked great. Glad it worked out that way, as I found out the tranny had upgrades so I needed to pull the chip to get it reburned and it made that task much simpler, as I now don't need to pull the entire PCM to get to the chip.
Now if Bill would just reburn that thing and get it back to me I'd be a much happier camper!!! Bill you out there!!! |
|
|
Hybrid Mode
