Anyone Ever Build a Custom Selector Switch Panel? (LCD, TFT, etc?)

[Haptown]

Knowing the pin positions would be very helpful.

While I am familiar with Arduino and ESP8266s and could help program them to display the tune on a lcd or oled, what I am really interested in is being able to disable the up/dn buttons with a DPST switch. Set it to NS, flip the switch hidden under the dash, and then see if anyone can figure it out.

@Getslideways, if you decide to tackle this, I am willing to help, but most of my limited experience is with the WeMos D1 Mini.

[Power Hungry]

Originally Posted by Haptown

Knowing the pin positions would be very helpful.

While I am familiar with Arduino and ESP8266s and could help program them to display the tune on a lcd or oled, what I am really interested in is being able to disable the up/dn buttons with a DPST switch. Set it to NS, flip the switch hidden under the dash, and then see if anyone can figure it out.

@Getslideways, if you decide to tackle this, I am willing to help, but most of my limited experience is with the WeMos D1 Mini.

It's actually very simple to disable. I've done it several times for customers with fleet vehicles. In on vacation til the 7th, but can get you the pinout when we return.