|
|
|||||||
| New Member Introductions
Welcome to the Power Hungry Performance Forum. We're glad that you're here! Start a new thread and tell us a little about yourself! PLEASE POST TECHNICAL and/or SUPPORT QUESTIONS in the APPROPRIATE SECTION of the FORUM |
 |
|
|
Thread Tools | Display Modes |
|
#1
Thu, November 21st, 2024, 03:31 PM
|
|||
|
|||
hello
hello, I have a 1999 F350 7.3 automatic
I work in firmware (C, STM32) and web, linux sysadmin. Though I've hardly done open source work, only slightly as a student. The most involved I've been with engines is changing the cam chain tensioner on my dual sport and checking the valve clearance. Helping remove a valve creeper from a gunked up gas SOHC V6 and figuring out the timing. I wanted to put a turbo on my 2rz tacoma and make a speeduino for it but don't really have the motivation since getting my 7.3. I've wanted to do a CCV catch can mod, some of the easy fuel tank mods, I dunno if wire an EBPV switch for an exhaust brake. Not sure if I will want a BTS built trans swap, just the TC and valve body, zf6 swap or just leave it. Last edited by dirtbikeAutist; Fri, November 22nd, 2024 at 04:41 PM. 
|
|
#2
Tue, November 26th, 2024, 04:28 PM
|
||||
|
||||
|
Welcome to the Forum! Looks like you have a few projects going. They should keep you busy for a while. LOL
Look forward to seeing some of them around the forum groups. Happy Thanksgiving! 
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
|
|
Linear Mode
