Prewired for factory sub I think

[mgd26]

Originally Posted by Afrancis

Well I looked again and found the screw where the plug is suppose to be, but there is no plug. So your saying I can buy a plug that will run from the amp all the way to the HU, or just to where the wire already there ends at? Also would you happen to have the part # for it? Thanks alot man for all the help.

i have just installed the audiophile head unit and sub im my 07 xlt 4x4.
and the parts i needed was:

to the stereo:
ford part number - 3u2z-14s411-DLA
motorcraft #er - wpt 219

to the amp:
Ford part number - 3u2z-14s411-CAAA
motorcraft #er - wpt 667.

if you google motorcraft pigtails and click on "pigtail id" you can see a pic of these two connectors so you can tell if they will work for you. i wouldn't think that an 05 would be any diff then a 07 in that area.

[Afrancis]

Thanks man

[blk07fx2screw]

mgd26, I saw your post about the two pigtails and their part numbers. I have an 07 FX2 SCREW that I just upgraded to an audiophile 6CD changer. I have all three of the factory plugs for the HU, however when tracing down the wiring for where the subwoofer is supposed to be, I have been unable to find it. My question is, did you just make your own wiring harness from the HU to the SUB using those two pigtails ? I am going to pull my rear seat out and pull the carpet up to see if I can find a factory plug, hopefully it will be there...somewhere. I've read some have it and some don't... so, we'll see. I can't understand why ford would prewire it at the HU, but not completely. Also, why they wouldn't carry the entire harness as an upgrade option. Thanks.