|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Sun, May 10th, 2009, 08:31 PM
|
||||
|
||||
My DYNO results are in.
well i ran my truck on the dyno Saturday and......
I guess i am pleased with the results but not were i wanted to be. first my truck is a 2001 F-350 7.3L with a DIY air filter and 4" turbo back exhaust. I have a Phoenix chip and ran it in stock, 100HP and 140HP settings. first was stock setting @ 227.01HP and 449.9torque second was the 100HP setting @ 290.68HP and 585.93 Torque and last was the 140HP setting @ 307.02HP and 607.74 Torque I really wanted to see 350Hp and 700 torque so i guess i will have to go to the hard $$$$$ parts. any suggestions on what to do first injectors, turbo then oil pump???? this is still my daily driver so i dont want to go to extremes nor do i really have the $$$$$ to do much at all right now.
__________________
Chris 2001 F-350 crew cab 4X4 DIY napa air filter  4" turbo back exhaust PHP flip chip--- stock,fuel sipper, 100hp, 140hp
|
|
|
Threaded Mode