Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled)
Reload this Page Can a TS chip be used in a FU package?
Register FAQ Calendar

F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled)
If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here.

 
 
Thread Tools Display Modes
  #1  
Old Tue, February 23rd, 2010, 01:56 PM
BrittonRacing BrittonRacing is offline
DIRT RACING 4 FUN
  
Join Date: Feb 2010
Location: Just outside Toledo Ohio
Posts: 3
BrittonRacing is on a distinguished road
Default Can a TS chip be used in a FU package?
Hi, I recently purchased a TS 6 position chip, from TS. I did research before I ordered, but evidently didn't do enough, otherwise I would have just ordered a PHP FU package.

I discovered upon installation of the TS, that my truck already had a SUPERCHIPS chip on the board. That might explain why my truck ran so well for an OBS powerstroke. I took it out, and installed the TS. But I really DO NOT LIKE THE SHIFTS!!!

I was wondering if the FU package could be bought without the PHP chip, and the cost of that. Just the burner and the TUNES from PHP for my truck.

Please let me know
  #2  
Old Tue, February 23rd, 2010, 02:00 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Yes, the FU package can be purchased without the chip. You WILL HAVE TO send the TS chip you have to Bill so it can be formatted to his chip burner code and work with the burner you get in the FU package.

What his charge will be is up to PHP to decide, but it can be done.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
  #3  
Old Tue, February 23rd, 2010, 02:05 PM
BrittonRacing BrittonRacing is offline
DIRT RACING 4 FUN
  
Join Date: Feb 2010
Location: Just outside Toledo Ohio
Posts: 3
BrittonRacing is on a distinguished road
Default
Ok, that's what I wanted to know. If someone from PHP could call or e-mail me to let me know of the price, I would greatly appreciate it.
  #4  
Old Tue, February 23rd, 2010, 02:07 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
You may be waiting for a while. I can only urge you to call as many times as necessary to get ahold of them. PHP is a two-person operation with a plate that is overflowing so they are super busy all the time.

Emails and PMs usually don't work so hot.
Keep in mind also that there was a death in the family and the office isn't going to be open.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
 

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 05:56 PM.

Contact Us - Power Hungry Performance Forum - Archive - Privacy Statement - Top

All Contents Copyright 2008-2024, Power Hungry Performance