Engine temps.

[88Racing]

Originally Posted by 408F150

I'm using a Reese 800tw/10,000gw Anti-Sway WD hitch (the kind that use break pads inside the WD bar brackets for the anti sway), which seems to work very well. I specifically chose my gearing to put me around 2100 rpm @ 55 mph with the OD locked out. I've geared and modified my truck as much as possible to keep me from having to buy a 250/350 since once you hit 8000#, 150's really start to get tapped out. They can tow it, but it's not fun. Gearing and cooling seem to be the two most substantial ways to make towing easier once you start hitting the 150's limits. My manual says I have a 9100# tow limit, but I'd never, ever pull that much weight in stock form. Next on my list is brakes in case my trailer, God forbid, decides to lock up or lose it's breaks one day.

Nice hitch!
I use the equalizer myself. Looked at the reese ones like that but for what I do with trailers the anti sway was a good option but not needed. I kick myself now and then that I should have gotten it.
I have a beefy car trailer rated at 12K that I use from time to time to haul cars for the dealers. The trailer itself is at around 2800.
My buddy called me up one night wondering if I could help him haul one of his broken down handy man vans back to the shop. I said sure. Worst thing I could have ever said. The van was full of the works: tools, materials, and ladders. I know that thing alone was pushing more than 6K. But being a good friend I used the winch and got it on the trailer. To this day I still wonder if I ever did any damage to that 03 f150's tranny. I pulled it to his shop from about 80 miles away the tranny temp never really got above 220. Towed it with od off. But the amazing part was I really didn't know I was pulling anything until it came to the hills.
That old truck of mine was a guinea pig for dakota digital. They outfitted it with a pillar gauge pod that had 3 holes. They threw in their digital gauges and away I went. I only had to stop in every once in awhile to get it looked at. They put in a voltage one, a ect one, and tft one.
Both the ect and tft were tapped and probed into the components. Every once in awhile they would change out the voltage with engine oil temp. They had one gauge that was a combo one, press a button and you could get another reading from a different source. I just thought I would mention the gauges, so know one was thinking about the tft on an edge because it wasn't available.

No edge or gryphon was used or tuner period. But it still felt like that 5.4 2V with 3.73's + stock tires still had power to pull plenty more.

Lars