|
|
|||||||
| Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) Power Hungry no longer sells the Phoenix/TS chip, but if you need custom tuning we can recommend a few really good tuners that will be able to still provide tuning and support for your chip. If you have any other questions or comments about the Phoenix/TS chip, please post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Sun, February 14th, 2010, 01:40 PM
|
||||
|
||||
TORQUE GAINS?
?Hey I'm looking into the pheonix tuner and so far i like what i see. The only thing i don't see that i would like to know is what are the torque gains?
|
|
#2
Sun, February 14th, 2010, 02:03 PM
|
||||
|
||||
|
__________________
ats turbo housing-Xwheel-1. exhaust housing, itp reg kit, 6637, ccv, adrenaline, 4'' straight to dual 5'' stacks out the back, gauges boost ,egt ,fuel, termi scan gauge, 6spd conversion, 238hybrids, beans tunes 434hp on mobile dyno |
|
#3
Sun, February 14th, 2010, 06:07 PM
|
|||
|
|||
|
Other than intake, exhaust and the chip, what other mods do you have to your truck?
I would love to see #s like that from my truck!
__________________
2000 Ford 7.3l 6 speed. DIY Intake, 4" Turbo back exhaust, FU Chip, Ported compressor housing |
|
#4
Sun, February 14th, 2010, 07:16 PM
|
||||
|
||||
|
To be completely up front with you, whenever you see an actual HP increase on a 7.3L you can realistically just about double the torque gain.
So, a tune that puts out an additional 80 HP will realistically give you an additional 160 ft. lbs.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
|
Linear Mode
