|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
#5
Sat, November 6th, 2010, 06:22 PM
|
||||
|
||||
If you can provide the ECM code (either the 4 digit Box Code or the Ford part number) from the ECM, I can tell you without question if that particular vehicle is supported. To the best of my knowledge though, all the 4.6 and 5.4 engines are supported.
The PCM is located in the passenger side firewall. It has 3 connectors and 2-10mm bolts holding it in. The sticker with the part number/Box Code looks like this...  I apologize for the quality. My Blackberry SUCKS at taking pictures. I hope this helps.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
|
Threaded Mode