|
|
|||||||
| F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) If you have a question or comment relating the new F.U. Chip or FU2 Flex Chip, post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Sun, July 18th, 2010, 07:26 AM
|
||||
|
||||
can't update FU chip burner
When I try to update the burner software it tells me that there is an update from v. 1.6.336 to v. 1.06.396 so when I click update it downloads the update then tells me that it has to restart the program to update it. When it shuts down this is the error message that I get, below.
What am I doing wrong or how do I fix it? |
|
#2
Mon, July 19th, 2010, 10:29 AM
|
||||
|
||||
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#3
Wed, July 28th, 2010, 08:02 AM
|
||||
|
||||
|
Thanks for the help but that is for a 32 bit system and not for the 64 bit Windows 7 that I am running.
I will have to call Tech support to get them to fix the problem.
__________________
Thank you and have a great day, Troy Detweiler I have a '99 F 250 7.3L Diesel w/ a 6 speed Tranny and 4x4. Mods: Amsoil dual bypass oil filters, Amsoil air intake mod DIY, fuel preasure spring mod(70psi), FU Chip and Burner , 3.73 rear gears, leveling kit (DIY), Stabilizer bars on the rear axle (DIY). '02 F 350 7.3L, 6spd,4x4,CC, Dually- Just bought 4-15-11 |
|
#4
Wed, July 28th, 2010, 09:06 AM
|
||||
|
||||
|
I will have Bill call you today.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years. Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim. |
|
#5
Fri, September 10th, 2010, 08:45 AM
|
||||
|
||||
|
I still haven't heard from Bill. Should I put this in a different spot for them to see?
__________________
Thank you and have a great day, Troy Detweiler I have a '99 F 250 7.3L Diesel w/ a 6 speed Tranny and 4x4. Mods: Amsoil dual bypass oil filters, Amsoil air intake mod DIY, fuel preasure spring mod(70psi), FU Chip and Burner , 3.73 rear gears, leveling kit (DIY), Stabilizer bars on the rear axle (DIY). '02 F 350 7.3L, 6spd,4x4,CC, Dually- Just bought 4-15-11 |
|
|
Linear Mode
