Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Ford F-150, Expedition, Navigator, Blackwood, Mark-LT, SVT Lightning and H-D Editions (Disabled) > 1997 to 2003 F-150

1997 to 2003 F-150
4.2L, 4.6L, and 5.4L equipped F-150s.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #15  
Old Thu, September 17th, 2009, 10:18 AM
RobbyMartin RobbyMartin is offline
Bacon King
 
Join Date: Sep 2009
Location: Yucaipa, CA
Posts: 69
RobbyMartin is on a distinguished road
Default

Quote:
Originally Posted by 88Racing View Post
Ok
From my understanding of tuners/programmers is this.
Once the pcm is flashed with a new tune it cannot be removed unless reflashed.
I assume the Hypertech has the same proceedure as the gryphon.
So by removing the battery, the pcm's memory has not been altered due to the pcm's flash memory.
However the Keep Alive Memory resets and sends a p1000 code and the only way to get rid of this is by the drive cycle reset. This takes 50-100 miles.

The gryphon only takes about 5-10 min to program initially. But when you get one with custom tunes only about 2 minutes.

Lars

OK, so here's my next question. If I remove the Hypertech program manually and there is no pause/lag by no longer having it installed, will I be dealing with the same issue if I get the Gryphon? I will go crazy if I get the Gryphon and I still have the same issue with pause/lag.
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:28 PM.


All Contents Copyright 2008-2024, Power Hungry Performance