|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
#2
Fri, February 20th, 2009, 04:06 PM
|
||||
|
||||
Ah - what do you mean "reinstalling your programmer"?
Are you saying it was off of the truck and when you plugged it back in to the OBDII port, you got this message? Or are you saying you decided to enter a new tune and that's what gave you the problem? Or perhaps it's something else? And, what year is your truck. Are you using a Gryphon or an Edge? Oh, welcome to the forum, by the way.  I've never heard of the error you're describing, so my questions are aimed at getting information for those who might help you (like Bill).- Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
|
#3
Fri, February 20th, 2009, 04:33 PM
|
||||
|
||||
|
Sounds like you've got the new 6.4L Recall Update from Ford.
Look here: [pi][/pi] Follow the instructions for the install and use the "Gryphon Update Manager" to download the latest updates. Current Firmware is 3.02.0596 Current Calibration is 1.02.0681 Make sure those are selected from the drop-down boxes on the updates menu. If you have any further questions, give us a jingle.  Take care.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
|
Linear Mode
