|
|
|||||||
| 2004 to 2008 F-150 and Mark-LT 4.2L, 4.6L and 5.4L equipped F-150s and Mark-LTs. |
|
|
Thread Tools | Display Modes |
|
#4
Mon, December 1st, 2008, 08:17 PM
|
||||
|
||||
Jack,
I rebuilt the latest files I had for you and set up a target update so you can have all the latest goodies. This will give you the new datalogging features as well as the new "Metric" display capabilities (not the Metric is very useful in the US). To monitor gear and lockup, go to [Menu], [Setup], [Display Settings], [4 Segment Digital], and then select which segment you want to change. Scroll down to "GEAR" and press [Enter]. Select [Set as Display] and then return to the main display. It should now display what gear you are in and also display a little "lock" symbol when the converter is locked. As for the issue, I agree that it is most likely the converter strategy causing the problems. If you were to go into the Custom Options and lower the 4th Gear Converter Unlock a couple miles an hour, it may improve or even completely resolve the issue. If it improves but doesn't go away completely, I can further refine the strategy to eliminate it. Hope this helps.
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1997! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!  Windows™ 11 is garbage!  Much to my surprise, I'm actually quite enjoying Linux! 
|
|
|
Threaded Mode